Author Index

A

  • Aghababaie, Meysam The effects of friction coefficient on the nonlinear behavior of an arch dam with jointed foundation [Volume 5, Issue 4, 2021, Pages 36-45]
  • Aghabozorgi, Pegah Numerical investigation of GFRP bars contribution on performance of concrete structural elements [Volume 5, Issue 4, 2021, Pages 1-12]
  • Ahmadi, Masoud Stability Analysis of Rocking Soil-Structure Systems Subjected to Near-Fault Pulses [Volume 5, Issue 1, 2020, Pages 29-39]
  • Ali Ghorbani, Mortaza Evaluation of the effect of reservoir length on seismic behavior of concrete gravity dams using Monte Carlo method [Volume 5, Issue 1, 2020, Pages 1-7]
  • Amirabadi, Rouhollah Sufficiency assessments of ground motion intensity measures employing kullback-leibler theory (applied for typical south pars offshore platforms) [Volume 5, Issue 4, 2021, Pages 22-35]
  • Asgari Marnani, Jafar An enhanced BEM approach applied to potential problems: a comparative study [Volume 5, Issue 1, 2020, Pages 51-59]
  • Azhir, Parham An enhanced BEM approach applied to potential problems: a comparative study [Volume 5, Issue 1, 2020, Pages 51-59]

B

  • Babaei, Mohammad Selecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters [Volume 5, Issue 3, 2021, Pages 23-33]
  • Babaei, Samira Sufficiency assessments of ground motion intensity measures employing kullback-leibler theory (applied for typical south pars offshore platforms) [Volume 5, Issue 4, 2021, Pages 22-35]
  • Babakhani, Behrouz Influence of changes in the prestress force on dynamic specifications of the prestressed concrete beam [Volume 5, Issue 1, 2020, Pages 8-14]
  • Baniassadi, Arash Application of endurance time method in damage assessment of concrete moment frames [Volume 5, Issue 2, 2020, Pages 1-11]
  • Bazmooneh, Amirali Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Behboodi, Saeed Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Behnamfar, Farhad The effects of friction coefficient on the nonlinear behavior of an arch dam with jointed foundation [Volume 5, Issue 4, 2021, Pages 36-45]

C

  • Charkhtab Basim, M. Performance-based optimal distribution of viscous dampers in ‎structure using hysteretic energy compatible endurance time excitations [Volume 5, Issue 3, 2021, Pages 46-55]
  • Charkhtab Basim, Mohammad Evaluation of efficiency index of friction energy dissipation devices using endurance time method [Volume 5, Issue 2, 2020, Pages 12-20]

D

  • Dabbaghchian, Iman Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Donyaii, Alireza Optimization of Reservoir Operation using a Bioinspired Metaheuristic Based on the COVID-19 Propagation Model [Volume 5, Issue 1, 2020, Pages 15-28]

E

  • Elahi, Hamidreza A simplified approach for evaluation of seismic displacements of pile group located in soil slope [Volume 5, Issue 1, 2020, Pages 40-50]
  • Esfandiari, Akbar Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Estekanchi, Homayoon Application of endurance time method in damage assessment of concrete moment frames [Volume 5, Issue 2, 2020, Pages 1-11]

F

  • Fadaee, S. Evaluation of Damage Index of Eccentrically-Braced Frames according to Link Beam’s Length with Soil-Structure Interaction Effects [Volume 5, Issue 3, 2021, Pages 78-90]
  • Farahmand Azar, B. Performance-based optimal distribution of viscous dampers in ‎structure using hysteretic energy compatible endurance time excitations [Volume 5, Issue 3, 2021, Pages 46-55]
  • Farahmand Azar, Bahman Evaluation of efficiency index of friction energy dissipation devices using endurance time method [Volume 5, Issue 2, 2020, Pages 12-20]
  • Farzaneh, S. Tropospheric delay efficiency from CSRS-PPP online service for meteorologists in Iran [Volume 5, Issue 3, 2021, Pages 67-77]
  • Ferdousi, A. Nonlinear seismic response of arch dams considering joint opening effects and boundary conditions of discontinuous foundation [Volume 5, Issue 3, 2021, Pages 56-66]

G

  • Ghadiri Rad, Mohammad Hossein Analyzing of thick plates with cutouts using the meshless (EFG) method based on higher order shear deformation theories for solving shear-locking issue [Volume 5, Issue 4, 2021, Pages 46-59]
  • Ghannadiasl, Amin Selecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters [Volume 5, Issue 3, 2021, Pages 23-33]
  • Gholizadeh, Saeed Investigating Importance of Friction between Elastomer Bearing and Its Support on the Seismic Performance of Skew Seat-type Bridges [Volume 5, Issue 4, 2021, Pages 60-66]

H

  • Hajimollaali, Hessam -Aldin A simplified approach for evaluation of seismic displacements of pile group located in soil slope [Volume 5, Issue 1, 2020, Pages 40-50]
  • Hamedi, Mohammad Reza A multi-objective optimization approach to optimal sensor placement of irregular LSF structures [Volume 5, Issue 3, 2021, Pages 13-22]
  • Hamedi, Nadia A multi-objective optimization approach to optimal sensor placement of irregular LSF structures [Volume 5, Issue 3, 2021, Pages 13-22]
  • Hassanpour, Sina Numerical investigation of GFRP bars contribution on performance of concrete structural elements [Volume 5, Issue 4, 2021, Pages 1-12]

J

  • Jafari, Fardin Prediction of reduced sound wave intensity in floor systems using machine learning methods [Volume 5, Issue 4, 2021, Pages 77-86]

K

  • Kelishadi, Massih The effects of friction coefficient on the nonlinear behavior of an arch dam with jointed foundation [Volume 5, Issue 4, 2021, Pages 36-45]
  • Khaloo, Alireza Numerical investigation of GFRP bars contribution on performance of concrete structural elements [Volume 5, Issue 4, 2021, Pages 1-12]
  • Khosravi, Morteza Evaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method [Volume 5, Issue 3, 2021, Pages 1-12]
  • Kouchaki, Mehdi Evaluation of the effect of reservoir length on seismic behavior of concrete gravity dams using Monte Carlo method [Volume 5, Issue 1, 2020, Pages 1-7]

M

  • Maghsoodi Shaghaghi, Amir Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Mahmoudy, Seyed Ali The application of endurance time method for optimum seismic design of steel moment-resisting frames using the uniform deformation theory [Volume 5, Issue 2, 2020, Pages 33-44]
  • Mardookhpour, Alireza Numerical simulation of the effect of uplift on seismic behavior of uncontrolled surface steel tanks with Abaqus software [Volume 5, Issue 4, 2021, Pages 13-21]
  • Masaeli, Hamid Stability Analysis of Rocking Soil-Structure Systems Subjected to Near-Fault Pulses [Volume 5, Issue 1, 2020, Pages 29-39]
  • Mashayekhi, M. Performance-based optimal distribution of viscous dampers in ‎structure using hysteretic energy compatible endurance time excitations [Volume 5, Issue 3, 2021, Pages 46-55]
  • Mashayekhi, Mohammadreza Determining the Critical Intensity for Crack Initiation in Concrete Arch Dams by Endurance Time Method [Volume 5, Issue 2, 2020, Pages 21-32]
  • Mirhosseini Hezaveh, S. M. Evaluation of Damage Index of Eccentrically-Braced Frames according to Link Beam’s Length with Soil-Structure Interaction Effects [Volume 5, Issue 3, 2021, Pages 78-90]
  • Miri, Seyed Mohsen The application of endurance time method for optimum seismic design of steel moment-resisting frames using the uniform deformation theory [Volume 5, Issue 2, 2020, Pages 33-44]
  • Mohammadgholiha, Masoud A multi-objective optimization approach to optimal sensor placement of irregular LSF structures [Volume 5, Issue 3, 2021, Pages 13-22]
  • Mohammadi, Yaghoub Selecting Optimal Dimensions of Internal Tube in Tube-in-Tube Structural Systems Based on Structural Parameters [Volume 5, Issue 3, 2021, Pages 23-33]
  • Mohammadnezhad, Hamid Prediction of reduced sound wave intensity in floor systems using machine learning methods [Volume 5, Issue 4, 2021, Pages 77-86]
  • Mostafaei, Hasan Determining the Critical Intensity for Crack Initiation in Concrete Arch Dams by Endurance Time Method [Volume 5, Issue 2, 2020, Pages 21-32]
  • Mostafaei, Hasan The effects of friction coefficient on the nonlinear behavior of an arch dam with jointed foundation [Volume 5, Issue 4, 2021, Pages 36-45]
  • Movaffaghi, Afshin Investigating Importance of Friction between Elastomer Bearing and Its Support on the Seismic Performance of Skew Seat-type Bridges [Volume 5, Issue 4, 2021, Pages 60-66]

P

  • Panji, Mehdi An enhanced BEM approach applied to potential problems: a comparative study [Volume 5, Issue 1, 2020, Pages 51-59]
  • Pasbani Khiavi, Majid Evaluation of the effect of reservoir length on seismic behavior of concrete gravity dams using Monte Carlo method [Volume 5, Issue 1, 2020, Pages 1-7]
  • Pirali, Mohammad Reza Modeling and calibration of a full-scale wastewater treatment plant using GPS-X model (A case study of Tehran) [Volume 5, Issue 4, 2021, Pages 67-76]

R

  • Rahami, H. Evaluation of Damage Index of Eccentrically-Braced Frames according to Link Beam’s Length with Soil-Structure Interaction Effects [Volume 5, Issue 3, 2021, Pages 78-90]
  • Rahami, Hossein Influence of changes in the prestress force on dynamic specifications of the prestressed concrete beam [Volume 5, Issue 1, 2020, Pages 8-14]
  • Ramezanzadeh, Ahmad Evaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method [Volume 5, Issue 3, 2021, Pages 1-12]
  • Rohanimanesh, Mohammad Sadegh An enhanced BEM approach applied to potential problems: a comparative study [Volume 5, Issue 1, 2020, Pages 51-59]

S

  • Sabermahani, Mohsen A simplified approach for evaluation of seismic displacements of pile group located in soil slope [Volume 5, Issue 1, 2020, Pages 40-50]
  • Sadri Moghaddam, Shabnam Modeling and calibration of a full-scale wastewater treatment plant using GPS-X model (A case study of Tehran) [Volume 5, Issue 4, 2021, Pages 67-76]
  • Safaei, Shayan Evaluation of site effects on the seismic performance of a friction-damped steel IMF under near-fault earthquakes [Volume 5, Issue 3, 2021, Pages 34-45]
  • Sam Khaniani, A. Tropospheric delay efficiency from CSRS-PPP online service for meteorologists in Iran [Volume 5, Issue 3, 2021, Pages 67-77]
  • Sanayei, Masoud Dynamic Response Evaluation of a Super-Tall Tower via Endurance Time Method [Volume 5, Issue 2, 2020, Pages 53-72]
  • Sarraf, Amirpouya Optimization of Reservoir Operation using a Bioinspired Metaheuristic Based on the COVID-19 Propagation Model [Volume 5, Issue 1, 2020, Pages 15-28]
  • Sedighi, Nahad Prediction of reduced sound wave intensity in floor systems using machine learning methods [Volume 5, Issue 4, 2021, Pages 77-86]
  • Shahabian, Farzad Analyzing of thick plates with cutouts using the meshless (EFG) method based on higher order shear deformation theories for solving shear-locking issue [Volume 5, Issue 4, 2021, Pages 46-59]
  • Sharifi, Mahdi Sufficiency assessments of ground motion intensity measures employing kullback-leibler theory (applied for typical south pars offshore platforms) [Volume 5, Issue 4, 2021, Pages 22-35]
  • Shirkhani, A. Performance-based optimal distribution of viscous dampers in ‎structure using hysteretic energy compatible endurance time excitations [Volume 5, Issue 3, 2021, Pages 46-55]
  • Shirkhani, Amir Evaluation of efficiency index of friction energy dissipation devices using endurance time method [Volume 5, Issue 2, 2020, Pages 12-20]
  • Sobhkhiz, Ramtin Numerical simulation of the effect of uplift on seismic behavior of uncontrolled surface steel tanks with Abaqus software [Volume 5, Issue 4, 2021, Pages 13-21]

T

  • Tajmir Riahi, Hossein The application of endurance time method for optimum seismic design of steel moment-resisting frames using the uniform deformation theory [Volume 5, Issue 2, 2020, Pages 33-44]
  • Tariverdilo, Saeed Investigating Importance of Friction between Elastomer Bearing and Its Support on the Seismic Performance of Skew Seat-type Bridges [Volume 5, Issue 4, 2021, Pages 60-66]
  • Taslimi, Arsam Evaluation of site effects on the seismic performance of a friction-damped steel IMF under near-fault earthquakes [Volume 5, Issue 3, 2021, Pages 34-45]

V

  • Vakili, Seyed Amin Analyzing of thick plates with cutouts using the meshless (EFG) method based on higher order shear deformation theories for solving shear-locking issue [Volume 5, Issue 4, 2021, Pages 46-59]
  • Vosoughifar, Hamid Reza A multi-objective optimization approach to optimal sensor placement of irregular LSF structures [Volume 5, Issue 3, 2021, Pages 13-22]

Y

  • Yekrangnia, Mohammad Application of Endurance Time method in evaluation of seismic performance of a typical sandwich panel building [Volume 5, Issue 2, 2020, Pages 45-52]

Z

  • Zare, Shokrollah Evaluation of Disc Cutter Performance in Rock Cutting Process Using 3D Finite Element Method [Volume 5, Issue 3, 2021, Pages 1-12]